P00FF P0019 OBD2 Code: Troubleshooting Guide for Your 2014 GMC Sierra

The dreaded “check engine” light has illuminated your 2014 GMC Sierra’s dashboard, and your OBD2 scanner reveals the cryptic codes P00FF and P0019. Don’t panic! This article will guide you through understanding these codes, their potential causes, and the steps you can take to resolve the issue.

Understanding P00FF and P0019 OBD2 Codes

P00FF and P0019 are related to your Sierra’s variable valve timing (VVT) system. Specifically, P00FF indicates a problem with the “A” camshaft position actuator control circuit, bank 1, while P0019 points to a “B” camshaft position actuator control circuit issue, also on bank 1. Bank 1 refers to the side of the engine containing cylinder number one. These codes often appear together and suggest a problem with the oil flow to the VVT system.

2014 GMC Sierra VVT System Diagram

Common Causes of P00FF and P0019 in a 2014 GMC Sierra

Several factors can trigger these codes in your 2014 GMC Sierra:

Low Engine Oil: Insufficient oil pressure can prevent the VVT system from functioning correctly.
Dirty or Contaminated Oil: Sludge and debris in the oil can clog the oil passages that feed the VVT actuators.
Faulty VVT Solenoids: These solenoids control the oil flow to the actuators and can malfunction due to electrical or mechanical issues.
Wiring Problems: Damaged or corroded wiring in the VVT control circuit can disrupt the signal to the actuators.
Failed Camshaft Position Sensors: Although less common, faulty camshaft position sensors can sometimes cause these codes.

Diagnosing and Fixing P00FF and P0019

Here’s a step-by-step guide to diagnosing and fixing the P00FF and P0019 codes:

Check Engine Oil Level: Ensure your Sierra has the correct amount of oil. If it’s low, top it off and see if the codes clear.
Inspect Oil Quality: If the oil is dirty or smells burnt, an oil change is recommended.
Test VVT Solenoids: You can test the solenoids using a multimeter to check for proper resistance.
Inspect Wiring and Connectors: Look for any signs of damage, corrosion, or loose connections in the wiring harness related to the VVT system.
Check Camshaft Position Sensors: Test the sensors using a multimeter or an oscilloscope.

Testing VVT Solenoid Resistance

What Happens If You Ignore P00FF and P0019?

Ignoring these codes can lead to:

Reduced Fuel Economy: The VVT system optimizes valve timing for better fuel efficiency. Malfunctions can significantly impact gas mileage.
Decreased Engine Performance: You might experience a loss of power, rough idling, or hesitation during acceleration.
Potential Engine Damage: In severe cases, ignoring these codes can lead to more serious engine problems, requiring costly repairs.

“Addressing these codes promptly is crucial. A simple oil change or solenoid replacement can prevent more serious and expensive repairs down the road,” says veteran automotive technician, Paul Matthews, ASE Certified Master Technician.

Preventing P00FF and P0019 Codes

Regular maintenance is key to preventing these codes. Follow your Sierra’s recommended oil change intervals and use high-quality oil.

Regular Oil Change

Conclusion

The P00FF and P0019 OBD2 codes in your 2014 GMC Sierra indicate potential issues with the variable valve timing system. While they might seem intimidating, addressing them promptly can save you time, money, and potential engine damage. By following the steps outlined in this guide, you can effectively diagnose and resolve these codes, ensuring your Sierra runs smoothly for years to come. Remember to perform regular maintenance and address any warning signs immediately.

FAQs

Can I drive my Sierra with P00FF and P0019 codes? While you can still drive, it’s recommended to address the issue as soon as possible.
How much does it cost to fix P00FF and P0019? The cost varies depending on the specific cause, ranging from a simple oil change to more expensive repairs like solenoid or sensor replacements.
Are P00FF and P0019 related? Yes, these codes often appear together and point towards issues within the same system.
Can I fix P00FF and P0019 myself? With some mechanical knowledge and tools, you can perform some of the diagnostic steps. However, more complex repairs might require professional assistance.
What is the VVT system? The Variable Valve Timing system adjusts the timing of the engine valves for optimal performance and fuel efficiency.
How often should I change my Sierra’s oil? Consult your owner’s manual for the recommended oil change interval.
What type of oil should I use in my 2014 GMC Sierra? Again, refer to your owner’s manual for the recommended oil type and viscosity.

Need further assistance? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 789 Elm Street, San Francisco, CA 94102, USA. Our 24/7 customer support team is ready to help.