THINKDIAG 2 Car OBD2 Scanner Bidirectional All System Diagnostic Tool CANFD ECU

129 $

Turn Your Smart Device Into A Professional Technician’s Diagnostic Tool Thinkdiag2 is a portable and economical car troubleshooting tool suitable for car owners, DIYers, and repair shops. It is equipped with Bluetooth 5.0 BLE dual-mode. Compatible with Android & IOS systems. It supports Bluetooth transmission between the longest distance of 33 feet, which allows you to perform diagnostic tests without […]

Category:

Description

Turn Your Smart Device Into A Professional Technician’s Diagnostic Tool

Thinkdiag2 is a portable and economical car troubleshooting tool suitable for car owners, DIYers, and repair shops. It is equipped with Bluetooth 5.0 BLE dual-mode. Compatible with Android & IOS systems. It supports Bluetooth transmission between the longest distance of 33 feet, which allows you to perform diagnostic tests without sitting in the car on hot summer days.

Thinkdiag2 professional scan tool added the CAN-FD protocol, which supports the newest (2020-2021) GM vehicles, and supports full system and full function diagnosis, its Auto-VIN function not only can quickly and accurately scan the full system for existing and potential faults but also can get a professional vehicle health diagnosis report after diagnosing. Support ECU Coding, and flash hidden functions for some VW, AUDI, BENZ, and BMW models. It can perform all the commands of mechanic needs, to find the problem whether caused by the car’s electrical wiring or the car’s component.

It is also a bidirectional control OBD2 scanner, the actuation tests help us to verify system input/output without using the vehicle’s controls, such as: turning on the radiator fan, adjusting the throttle, opening/closing windows, operating mirrors, injector Buz test, and turning on interior and exterior lights, sound horn, test door lock actuators, etc. Not only supporting 15 popular special functions, if entering the all-system diagnostic menu, but you will also unlock more special functions of your vehicle support, not at all inferior to any high-value (exceed 400 USD) professional diagnostic tool.

The k*y fob programming is a popular function for vehicle owners. To prevent the car from being used by unauthorized k*ys, and must be performed the anti-theft k*y matching function, so that the immobilizer control system of the car identifies and authorizes remote control k*ys to normally use the car. Notice: When the ignition switch k*y/combined instrument panel/ECU/BCM/ remote control battery is replaced, IMMO matching must be performed.

Repair Info provides vehicle diagnostic tutorials, flashlight functions, and a coverage list. Adopt soft rubber and ABS plastic shell, which are more wear-resistant and dustproof but also have the effect of anti-drop protection and shock absorption. The body uses a double-sided signal indicator to better identify the communication status, where the green signal indicates a diagnostic connection signal, the blue signal indicates a Bluetooth signal and the red light indicates a power signal.

Tips: Internet connection is recommended when using it. Some functions may not be available or diagnostic result error without connecting network.

ThinkDiag 2 has 15+Maintenance reset function

  • Oil Light Reset: This allows you to recalculate the engine oil life system after an oil change.
  • TPMS Reset: When the car tire pressure fault light is on, after carrying out maintenance, you need to reset the tire pressure through the tire pressure reset function to extinguish the tire pressure fault light.
  • IMMO Matching: In order to prevent the car from being used with illegal k*ys, the anti-theft k*y matching function enables the immobilizer control system on the car to identify and authorize the remote control before the car can be used normally.
  • Brake pad reset: When the brake pads and brake pad wear sensing line are replaced, the brake pad indicator lights up, after the brake pad sensor line short circuit is repaired, or after the servo motor is replaced, the reset needs to be done.
  • SAS Calibration: Calibrate the steering angle sensor and clear the fault memory.
  • Battery Reset: It is to use Thinkdiag2 to perform a reset process on the monitoring unit of the car battery, clear the original fault information about the battery being low, make it match again, and let the monitoring unit monitor with the relevant information of the existing battery as the standard.
  • ABS Bleeding: When the ABS system contains air, the brake system needs to be exhausted through the ABS exhaust function to restore the ABS system braking sensitivity. The ABS bleed function is required when replacing the ABS computer, ABS pump, brake master pump, brake sub-pump, brake lines, and brake fluid.
  • ETS Learning: Initializes the throttle actuator to restore the “learning” values stored on the ECU to their default state.
  • DPF regeneration: Generally, DPF regeneration matching is required when the exhaust back pressure sensor is replaced, the particulate trap is removed or replaced, the fuel additive nozzle is removed or replaced, the catalytic oxidizer is removed or replaced, the DPF regeneration fault light is illuminated and matched after repair, and the DPF regeneration control module is repaired and replaced, mainly to remove the trap performance by using combustion oxidation on a regular basis Always maintain the best stability.
  • Injector Coding: usually in the replacement of ECU, the injector nozzle, is required to confirm the code of each cylinder nozzle or re-code. So that the cylinder can better identify each cylinder nozzle, and more accurate control or correction of the amount of fuel injection of each cylinder.
  • Sunroof initialization: This function can set the sunroof locking off, closing when it rains, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
  • EGR Adaption: This function can be used for self-learning after EGR (Exhaust Gas Recirculation) valve cleaning or replacement
  • Suspension Matching: When replacing the body height sensor in the air suspension system, after the control module or when the car is leveled incorrectly, this function needs to be performed to adjust the body height sensor for level calibration.
  • Transmission Learning: When the transmission is disassembled or repaired (after the battery is disconnected in some car models), it will lead to shift delay or shock problem, then this function needs to be performed to make the transmission compensate automatically according to the driving conditions in order to achieve a more comfortable and ideal shift quality.
  • Headlight Matching

Add CAN-FD protocol

  • 2021 Chevrolet Tracker/Suburban/Tahoe
  • 2020-2021 Chevrolet Onix 1.0L(L4F/L4G/LIJ/LIF)/Onix 1.2L(LIF)
  • 2021 Cadillac Escalade/Escalade ESV
  • 2021 GMC YUKON/YUKON XL
  • 2020 Chevrolet Tracker

Active Test

The advantage of Thinkdiag2 is that it supports full bi-directional control capability to send commands to the vehicle’s systems/components to verify system inputs/outputs without using the vehicle controller. like Shutter Grill Relay Test, Low-Pressure EGR Actuator Test, High-Pressure EGR Actuator Test, Intake Pressure Control Valve Actuator Test, Low-Pressure EGR System Test, Low-Pressure EGR Differential Pressure Sensor Test, 2 stages turbocharger boost test, VTEC low V/T check, Compression Test, IMT (IMRC) test, VTEC Test, VTEC(VCM) Test.

ECU Coding

The coding function is used to reflash the vehicle control module, which allows you to reprogram the adaptive data of certain components after performing repairs or replacing certain components. It can do flash hidden functions for some VW, AUDI, BENZ, and BMW models.

If you want to confirm whether your model can perform this function, please provide the VIN number or specific vehicle information (specific model/country ) and we will confirm for you.

One-Touch AutoVIN Technology

AutoVIN function supports Thinkdiag2 to automatically identify most car modelsand VIN codes. You can enter the corresponding menu and perform a one-click full vehicle scan and a system-wide vehicle health report will be automatically generated later which the report can be shared.

Registration Process

Thinkdiag2 only supports 1-year full software function use and update, after 1-year, if you don’t renew it, you can only use the basic OBDII full function.

To subscribe to one car brand need pay additionally,In-app payment. (after subscription, you can get full system functions and special functions of all compatible models under its brand).

Do you think it’s expensive? Don’t worry, you can earn points in the app by activating your device/doing tasks/check-in, etc. Points can be exchanged for rewards, but you can’t convert it to cash, and points can only be used in the “Thinkdiag” app.

Notice: Points will never be cleared.

  • Component Matching: Compatible with Volkswagen / SKODA / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / KIA / Subaru etc.
  • Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc.
  • Online Account Login Service: Compatible with Volkswagen / Audi / SKODA / Seat etc.
  • Online Calibration: Compatible with Volkswagen / Audi / SKODA / Seat etc.
  • Online Parameterization: Compatible with Volkswagen / Audi / SKODA / Seat etc.
  • IMMO Matching/K*y fob Programming: Compatible with Volkswagen / Audi / SKODA / Seat etc.
  • Guided Functions: Compatible with Volkswagen / Audi / SKODA / Seat etc.
  • Power Balance: Compatible with Chrysler / GM / Ford etc.
  • Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.
  • SCN Coding for Benz

Supports the diagnosis of Chrysler, Dodge, Jeep, Alfa-Romeo, and Fiat after 2019, but only provides the login entrance of AutoAuth. You need to purchase a registration number from the AutoAuth official website and log in to use it.

Product Parameters

Model Thinkdiag2
Product Size 4.8*2.7*1.1 inches
Operating Voltage 9V-18V
Working Power ≤2W
Operating Temperature 14℉~122℉
Storage Temperature -4℉~140℉
Number of Connector Pins 15 PIN
Length of Diagnostic Cable 23 inches
Bluetooth Version 5.0BLE Bluetooth Dual-mode
Compatible Device IOS 9.0 and above system & Andriod 5.0 and above system
What’s in the package? Thinkdiag2 Bluetooth Scanner, DB15 three-row to OBD 16pin diagnostic cable, EVA Storage Bag, Multilingual manuals.
THINKSCAN SD4 THINKSCAN SD6 THINKDIAG THINKDIAG 2 THINKSCAN MAX THINKSCAN MAX 2
See Details
See Details
See Details
Add To Basket
See Details
Add To Basket
Customer Reviews
3.6 out of 5 stars
106
4.0 out of 5 stars
137
4.1 out of 5 stars
880
4.1 out of 5 stars
302
3.9 out of 5 stars
175
4.0 out of 5 stars
277
Price £124.17£125 £312.50£312.50
Diagnosis SRS, Motorsystem, ABS, AT SRS, Motorsystem, ABS, AT, BCM ,IC ALLE Systeme ALLE Systeme ALLE Systeme ALLE Systeme
Service functions Optional 3 service functions out of 28Service functions(Free forever) Optional 5 service functions out of 28Service functions(Free forever) 15 service functions 16 service functions 28 service functions 28 service functions
Bluetooth Version Bluetooth 5.0 Bluetooth 5.0 Bluetooth 4.0 Bluetooth 5.0 Bluetooth 4.0 Bluetooth 5.0
CAN-FD protocol none none none none
Storage 1G RAM+16G ROM 1G RAM+16G ROM none none 2G RAM+16G ROM 2G RAM+32G ROM
obd2 full functions
Battery 600mAh/3.7V 600mAh/3.7V none none 3150mAh/7.6V 3150mAh/7.6V
Touch Screen 4” 4” / / 5.99” 5.99”

On Sep 17, 2024 at 20:55:26 PDT, seller added the following information:

Additional information

Product Features 2

Bidirectional Control,Actuation Test

Vehicle Type

Passenger Vehicle

Manufacturer Part Number

2023 THINKDIAG 2

Brand

ThinkCar

Supported System

ABS, DPF, EPB, Engine, Transmission, ECM, IMMO, BMS, SUS, SAS, SR

Accessories

Carrying Case, Password Paper, User Guide

Version

2024 Upgrade Version

Advantage 2

12 Months Free Update

Connectivity

Bluetooth

Advantage 1

All software is free to use

OBD Interface

CAN, EOBD, OBD, OBDII

Features

Backlit Display, Check Engine Light Shut Off, Color Display, Eras

Product Features 1

OBD2 Full Functions,All System Diagnostics

CountryRegion of Manufacture

China

Type 1

Car OBD2 Diagnostic Scan Tool

UPC

615517434790

Reviews

There are no reviews yet.

Be the first to review “THINKDIAG 2 Car OBD2 Scanner Bidirectional All System Diagnostic Tool CANFD ECU”

Your email address will not be published. Required fields are marked *